Bộ truyền tín hiệu IDK NJR-T01UDH

Giá bán: Liên hệ

    Đặt hàng

    Bộ truyền tín hiệu IDK NJR-T01UDH

    Thông số kỹ thuật:

    Item NJR-T01UHD (Transmitter)
    Model MM / SM CAT
     

    Input

    1 inputHDMI (*1) / DVI 1.0

    TMDS single link HDCP 1.4 / 2.2 HDR (*2)

    EDID emulation

    Connector: Female HDMI Type A (19-pin) (*3)

     

     

     

    Output

    1 inputDigital signal for

    extension Connector: 2 LCs

    1 inputDigital signal for

    extension Connector: RJ-45

    1 inputHDMI (*1) / DVI 1.0

    *For monitoring input signals TMDS single link

    HDCP 1.4 / 2.2

    HDR (*2)

    Connector: Female HDMI Type A (19-pin) (*3)

    Format VGA / SVGA / XGA / W XGA (1280×768) / W XGA (1280×800) / Quad-VGA / SXGA / W XGA (1360×768) / WXGA (1366×768) / SXGA+ / W XGA+ / W XGA++ / UXGA / W SXGA+ / VESAHD / W UXGA / QW XGA / 4K (*4)480i / 480p / 576i / 576p / 720p / 1080i / 1080p / 4K (*4)
    Color depth 24 bit, 30 bi, 36 bit Deep Color (*5)
    Dot clock 25 MHz to 600 MHz
    TMDS clock 25 MHz to 300 MHz
    TMDS data rate 0.75 Gbps to 18 Gbps
     

    Digital audio input

    Multi-channel linear PCM up to 8 channelsSampling frequency: 32 kHz to 192 kHz Sample size: 16 bit to 24 bit

    Reference level: -20 dBFS Max. input level: 0 dBFS

     

    Digital audio output

    Multi-channel linear PCM up to 8 channels Sampling frequency: 32 kHz to 192 kHzSample size: 16 bit to 24 bit Reference level: -20 dBFS Max. output level: 0 dBFS
     

    Analog audio input

    1 inputStereo L/R balanced / unbalanced

    Input impedance: 48 kΩ balanced / 24 kΩ unbalanced Reference level: -10 dBu

    Max. input level: +10 dBu Connector: 5-pin terminal block

     

    Analog audio output

    1 inputStereo L/R balanced / unbalanced

    Output impedance:100 Ω balanced / 50 Ω unbalanced Reference level: -10 dBu

    Max. output level: +10 dBu Connector: 5-pin terminal block

     

     

     

     

     

     

    Cable

    for extension

    Cable Duplex fiber cable, SFP+ module Cat6A STP cable
     

    Polishing (*6)

    SFP+ for Multimode:PC polishing (recommended)

    SFP+ for Singlemode: UPC polishing (recommended),

    SPC supported

    * APC is not supported

     

    Maximum extension distance

    Multimode fiber (OM3):984 ft. (300 m)

    Singlemode fiber (OS1):

    6.21 mi. (10 km)

    Singlemode fiber (OS1):

    24.85 mi. (40 km,

    optional) (*7)

    Cat6A STP: 328 ft. (100m) (*8)
    Control RS-232C 1 port / male D-sub (9 pin), full duplex, up to 115.2 kbps
    LAN 1 port / RJ-45 10Base-T / 100Base-TX / 1000Base-T (Auto Negotiation), Auto MDI / MDI-X
     

     

    General

    AC adapter Input: 100 – 240 VAC ± 10%, 50 Hz / 60 Hz±3 Hz Output: DC 12 V 3 A (A dedicated AC adapter is provided)
    Power consumption About 18 W atts About 21 W atts
    Dimensions 8.3 (W) × 1.2 (H) ×5.5 (D)” (210 (W) × 30 (H) × 140 (D) mm) (EIA thin high, half rack wide) (Excluding and the like)connectors
    Weight 2.2 lbs (1.0 kg) 2.2 lbs (1.0 kg)
    Temperature Operating: 32°F to 104°F (0°C to 40°C)Storage: -4°F to +176°F (-20°C to 80°C)
    Humidity Operating / Storage: 20% to 90% (Non Condensing)